What does AL mean on Aqua Rite?
AquaRite Model No. AL-4 This changes the default display from average salt to percent output.
Where is the model number on Aqua Rite?
The model number is on the inside of the door. It should be something like AQ-RITE. It’s right by the barcode.
Can you install Hayward salt Cell backwards?
The cell works the same regardless of which direction water flows.
Can a salt cell be installed backwards?
The direction doesn’t matter.
What should my chlorinator read?
On a Hayward Salt Chlorinator, your salt reading should be between 2,700 – 3,400 PPM (parts per million) with the optimum level of 3,200 PPM.
What should pool Instant salt level be?
between 2700-3400 ppm
The ideal salt level is between 2700-3400 ppm (parts per million) with 3200 ppm being optimal. Before adding salt to your pool, test the water to check your salt level. If the level is low, determine the number of gallons in the pool and add salt according to the chart below.
How can I tell how old my Hayward pool filter is?
The product ID tag and serial number can tell you the month and year it was manufactured, and for the Aquarite/Goldline SWCG cells the length of the warranty….The 6th -8th number will be the year & month Example:
- 402 = 2004, Feb.
- 405 = 2004, May.
- 501 = 2005, Jan.
- 502 = 2005, Feb.
How can you tell how old a Hayward pump is?
The 5th and 6th digits of the serial number of a Hayward heat pump pool heater are the year of manufacture, and the next two are the month.
How do you recalibrate Aqua Rite salt Cell?
Turn Salt System Off and On With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process.
How do you reset the salt reading on Aqua Rite?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.