What can you do with Arduino Yún?
The Yún distinguishes itself from other Arduino boards by its ability to communicate with the Linux distribution onboard, offering a powerful networked computer with the ease of an Arduino. In addition to Linux commands like the cURL, you can write your own shell and python scripts for robust interactions.
How upload Yun to Arduino?
Open the Arduino IDE. Under the Tools > Port menu, you should see an entry that lists your Yún’s name and its IP address. Under the Board menu, select Arduino Yún. Open the Blink example (File > Examples > 01Basics > Blink) and upload the sketch to the board.
How do I connect my Arduino Yún to WiFi?
connect your Arduino Yun to the wifi network. SSH into your Yun. install the Arudino IDE on your computer….Connect your Arduino WiFi
- ensure you’re still connected to the Arduino YUN-09XXXX WiFi network.
- revisit arduino. local or 192.168. 240.1.
- click the Configure Button in the top right.
What is an Arduino Yún?
The Yún is somewhat unique in that it’s a module with two processors, one that supports standard Arduino programming and a second processor that supports Linux and the OpenWrt wireless stack. The Yún ($59) has an Arduino Uno form factor and there are clones like the LinkIt Smart 7688 Duo ($18) in an Arduino Nano form factor.
What are the components of the Yun?
The Yun’s primary components are: Atmel ATmega32U4 – this is the “Arduino chip” that controls the pins and lets you do all the hardware hacking that you associate with Arduinos. When you send a sketch (Arduino code) to the Yun via the Arduino IDE, it’s running on this chip.
What is OpenWrt arduino yun?
It runs OpenWRT, “a Linux distribution for embedded devices.” Three buttons: WiFi reset, “Arduino chip” reset, and “Linux chip” reset. You’ll use the WiFi reset most often. Unlike the standard Arduino, the Yun does not have a dedicated port for power.
How to connect Arduino Yún to Internet of Things (IoT)?
For Internet of Things (IoT) projects you need to pass data from the Arduino and some server. The communications and the server would be something like MQTT or Redis. The Yún does not have direct access to the Wifi or ethernet port so the standard Arduino libraries for MQTT or Redis etc. will not work.