How do I access SonicPoint?

How do I access SonicPoint?

Start your Web browser and direct it to the default management IP address for the SonicPoint, 192.168. 1.20. TIP: If you are unable to access the SonicPoint-N you may press the Reset Button on the SonicPoint-Ns to access it in SafeMode and then follow the above steps again.

How do I reset my SonicWALL access point?

You can reboot individual access points or groups of access points from the Access Point Objects section on the Device > Access Points > Settings page: Reboot a single object by: Check the checkbox next to the name of the access point to be rebooted. Click Reboot.

How do I manage my SonicWALL access points?

Configure the existing SonicPoint profile or create a new profile.

1. Select SonicPoint.
2. Configure the default profile or select Add.
3. Configure your Wireless A and/or Wireless G Settings. From here you can change the SSID, Radio Mode, Channel, ACL Enforcement, Encryption, and advanced settings.
4. When complete, select OK.

What is sonic point?

SonicPoints are wireless access points designed to work with Dell SonicWALL network security appliances to provide secure wireless access to enterprise networks.

How do I update Sonicware firmware?

Managed Mode (Automatic Update) Under this mode, SonicPoint firmware can be automatic updated. Connect one LAN port on the SonicPoint to a SonicOS appliance interface. Navigate to the Network | Interfaces page | Click Configure for the interface to which your SonicPoint is connected.

How long does it take for a SonicWall to reboot?

Once you have confirmed that you want to restart the SonicWall, it will take 2 -4 minutes to boot the device.

How do I fix NetExtender?

Navigate to Windows Service manager under Control Panel > Administrator Tools > Services. Look for the Remote Access Auto Connection Manager and Remote Access Connection Manager to see if those two services have been started. If not, set them to automatic start, reboot the machine, and install NetExtender again.

How do I register a SonicWave?

How-To Steps

1. Power up the access point using PoE injector or AC adapter.
2. Connect AP to the network using Ethernet cable.
3. Launch SonicWiFi mobile app, login using cloud credentials (same as MySonicWall)
4. From the menu click on “Register SonicWave”

How do I add SonicWave to SonicWall?

To add the Switch to the SonicWall, Navigate to Manage | Network | Interfaces and then click on Configure for X5 interface and select the Advanced tab. Select Enable AutoDiscovery of SonicWall Switches and click OK.

How can I find my wireless access point?

How to Physically Locate a Rogue Access Point

1. Hold the laptop close to the body at stomach level.
2. Use a WiFi scanner to identify the rogue APs BSSID and track its WiFi signal.
3. Stand in one specific direction long enough to note the exact WiFi signal.
4. From the same spot, turn 90 degrees and note the exact WiFi signal.

Where is the SonicWall serial number?

Log into your account in www.mysonicwall.com….Using the firewall management interface (Serial Number and Model Number)

1. Login to the firewall.
2. Navigate to Monitor | System Status.
3. The serial number and model is located under the System Information section.

How do you update access points?

Options for AP Firmware Updates

1. Select Dashboard > Gateway Wireless Controller.
2. Select the Access Points tab.
3. Select an AP.
4. From the Action drop-down button, select Upgrade.
5. Click Yes to confirm.

What is the difference between sonicpoint ni/ne and sonicpoint-N?

SonicPoint-N belongs to the same category as Ni/Ne and N-DR. Has a larger dimension than a SonicPoint-Ni/Ne. Weighing more than a SonicPoint Ni/Ne. Powered-on only by 802.3af PoE injector (no AC power supply). Three external antennas. Dual-Band capabilities (2.4 Ghz and 5 Ghz).

Why is the sonicpoint-N image not embedded in the sonicos enhanced firmware?

When in Managed Mode, the SonicPoint-N image is not embedded in the SonicOS Enhanced firmware of the SonicWall UTM appliance (as it is done in early SonicPoint models), due to which the SonicWall UTM appliance requires to be connected to the Internet in order to download the SonicPoint-N firmware image after the SonicPoint Discovery;

Does sonicpoint support stand-alone mode?

TIP: For early SonicPoint overview, features specifications please refer to 170505335137917. No support for Stand-Alone Mode (as an “autonomous” access point), meaning that they cannot be managed through a third party appliance functioning as classic or unmanaged access points.

Is the sonicpoint-N configurable without a SonicWall UTM appliance?

In this case the SonicPoint-N is not configurable without a SonicWall UTM appliance (see below).