How do I factory reset my supersonic tablet?

How do I factory reset my supersonic tablet?

Firstly hold down the Power button, until your device is turned on. Then from the home screen open Menu and choose Settings. Select Backup & Reset and tap Factory data reset. Choose Reset device and select Erase everything to begin hard reset operation.

How do you reset a SC?

Models SC-HTE180, SC-HTE80

1. Turn the system ON.
2. Press and hold the Power button on the main unit for a minimum of 4 seconds.
3. Release the Power button. “RESET” is shown on the display.
4. Turn off the unit and then turn it back on again. All the settings are reset to the factory defaults.

How do I restore my Ricoh to factory settings?

Press the “./*” key and the “#” key on the Ricoh copier at the same time and hold for 10 seconds. The copier will shut down and begin to re-boot. During this process, the Ricoh is resetting itself to factory default settings.

How do I clear the error on my Ricoh printer?

Method of Ricoh Printer In Error State :

1. Method 1: Checking the connection link of the printer with the power supply.
2. Method 2: Rebooting the printer.
3. Method 3: Update/Reinstall the printer driver.
4. Method 4: Update the BIOS.
5. Method 5. Run the troubleshooter.

How do I remove the battery from my supersonic tablet?

The battery is secured to the back panel with tape and glue. Peel back the tape around the battery and discard it. Tear through the adhesive holding the battery by using the spudger tool.

How do you charge a supersonic tablet?

Titan

1. Remove the battery.
2. Press and hold the “Power” button for 20 seconds.
3. Now put the battery back in.
4. Plug it in to charge and allow it to fully charge before turning it on.

Who owns Supersonic?

SuperSonic was acquired by ironSource on Sep 10, 2015 .

Who owns Supersonic TVS?

Super Sonic TV – MITO Corporation.