What is 0603 package?
The size of SMD resistors is indicated by a numerical code, such as 0603. This code contains the width and height of the package. So, the imperial code 0603 indicates a length of 0.060″ and a width of 0.030″. The SMD package code can be given in either imperial or metric units.
What is the size of 0603?
The standard dimensions of an 0603 package are: Length: 1.55 ± 0.05 mm. Width: 0.85 ± 0.05 mm. Height: 0.45 ± 0.05 mm.
How do I know what SMD resistor I have?
Standard-tolerance SMD resistors are marked with a simple 3-digit code. The first two numbers will indicate the significant digits, and the third will be the multiplier, telling you the power of ten to which the two significant digits must be multiplied (or how many zeros to add).
What is the size of resistor?
The most common through-hole resistors come in an axial package. The size of an axial resistor is relative to its power rating. A common ½W resistor measures about 9.2mm across, while a smaller ¼W resistor is about 6.3mm long. A half-watt (½W) resistor (above) sized up to a quarter-watt (¼W).
Is 0603 metric or imperial?
metric
0201 is imperial and 0603 is metric. Here is the breakdown of the numbers, 0603 approximate dimensions are 0.6mm x 0.3mm which is as simple as removing the decimal point to make that pack size. The imperial size for the 0603 is 0201 which is 0.02 in × 0.01.
What is the value of r100 SMD resistor?
The value of SMD resistor code 100 is 10 Ohms.
What is imperial code?
The Imperial Penal Code, also known as the Imperial Legal Code and simply Imperial Code, was a body of laws issued by the Galactic Empire. It represented the branch of Imperial legal statutes concerned with criminal law. It consisted of seventeen volumes.
Are 0603 land patterns interchangeable?
Some land patterns have rounded corners, although the lateral pad dimensions and center-to-center spacing will be the same. No matter what 0603 package footprint you use in your device, they will be interchangeable between different components.
Do all 0603 package footprints have the same dimensions?
Because the IPC 7351 standard provides some leeway on pad sizes and land patterns, not all 0603 package footprints have the same dimensions. It is a good idea for designers to confirm the dimensions of their desired 0603’s datasheet to see if it meets the typical sizing.
What is the difference between 0603 and 0201?
The 0603 metric package has the same dimensions as an 0201 imperial package. The package name is correlated with its land pattern in inches. So the “06” in the 0603 package name means it is .06 inches in length and the “03” means it is .03 inches in width.
What is an 0603 SMD component?
When someone refers to an “0603 SMD component,” they are almost universally referring to the imperial version of the 0603 package footprint. The 0603 metric package has the same dimensions as an 0201 imperial package. The package name is correlated with its land pattern in inches.