How do you set a work plane in Revit?
Select a work plane by name, by picking a plane, or by picking a line in the plane you want to select. On the ribbon, click (Set). In the Work Plane dialog, under Specify a new Work Plane, select one of the following options: Name—Choose an available work plane from the list, and click OK.
What is a work plane Revit?
A work plane is a virtual 2-dimensional surface used as the origin for a view or for sketching elements. Work Plane Set or Show or Viewer. on the Architecture, Structure, or Systems tab in projects. on the Create tab of the Family Editor.
How do you create a plane in Revit?
Add a Reference Plane
- On the Draw panel, click (Pick Lines).
- On the Options bar, specify an offset, if desired.
- Select the Lock option to lock the reference plane to the line.
- Move the cursor near the line to which you want to place the reference plane and click.
How do you select a reference plane in Revit?
Use the Line tool or the Pick Line tool to draw a reference plane.
- On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane)
- To draw a line: On the Draw panel, click (Line).
- To pick an existing line: On the Draw panel, click (Pick Lines).
What is a working plane in lighting?
(Term of lighting design) An imaginary horizontal plane situated at the nominal working height in an interior space. Most illuminance and daylight factor measurements and calculations are made for points on this plane.
How do you make a sloped work plane in Revit?
To create the named Reference Plane, go to any of the primary discipline tabs in Revit: Architecture, Structure or Systems. On the Work Plane Panel select Reference Plane. Select the intersection of the grid and the level at the location where you want to start the reference plane at and draw at the desired angle.
What tool is used to assist in the positioning of work planes?
The Set Working Plane tool is in the 3D Modeling tool set. The Set Working Plane tool can set the location and angle of the working plane. Set the working plane to any location in 3D space. Double-click the Set Working Plane tool to set the working plane to the layer plane.
What do you mean by reference plane?
In celestial mechanics, the plane of reference (or reference plane) is the plane used to define orbital elements (positions). The two main orbital elements that are measured with respect to the plane of reference are the inclination and the longitude of the ascending node.
What is the difference between reference plane and reference line in Revit?
What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.
What is reference plane in Revit?
Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Topics in this section. Add a Reference Plane. Use the Line tool or the Pick Line tool to draw a reference plane.
What is a working plane?
The plane at which work is usually done, at which the illumination is specified and measured; usually assumed to be a horizontal plane about 30 in. (76 cm) above the floor.
What is the working plane height?
The workplane is a horizontal plane at a height of 0.5 meters from the floor that spans the entire room, representing a typical height of a desk, or working surface.
How to use work plane in Revit?
You can select any plane that can be dimensioned, including wall faces, faces in linked models, extrusion faces, levels, grids, and reference planes. Pick a line and use the work plane it was sketched in — Revit creates a work plane that is coplanar with the work plane of the selected line.
How to select a work plane in AutoCAD?
Select a work plane by name, by picking a plane, or by picking a line in the plane you want to select. On the ribbon, click (Set). Name —Choose an available work plane from the list, and click OK. The list includes levels, grids, and named reference planes.
How do I create a work plane in family editor?
1 On the ribbon, click (Set). 1.1 Architecture tab Work Plane panel (Set) 1.2 Family Editor: Create tab Work Plane panel (Set)