How long does Vibra-Tite take to cure?
30 min
Vibra-Tite VC-3 Threadmate is one of the most versatile threadlockers available on the market….Additional information.
| Dry Time | 30 min |
|---|---|
| Cure Type | Solvent Evaporation |
| Harmonized Tariff Schedule | 3506.91 |
| Available Sizes | 1 mL, 5 mL, 5 mL Blistercarded, 30 mL, 250 mL, 1 qt, 1 gal, 100pc Fishbowl |
| Color | Red |
What is Vibra-Tite for?
Vibra-Tite VC threadlockers are soft locking materials which are applied to a fastener and then air dried. Once assembled, the vibration absorbing characteristics keep the fastener isolated and prevent loosening. VC threadlocker can be easily adjusted, removed, and reused.
What is the best threadlocker for guns?
Vibra-Tite VC-3 Threadmate is one of the most versatile firearm threadlocker available on the market. Unlike traditional liquid lockers which cure to form a hard bond, VC-3 is a blend of resins designed to remain flexible and absorb vibration.
Which Loctite is best for guns?
There are a couple of different Loctite primers available, I use 7694 which seems to work on every one of their products, but 7088 should also work on all the common types you are likely to use on a gun or car.
Is Blue Loctite good for guns?
As far as Blue goes I have used 242 on firearms, no issues. I believe Blue is an application/strength and whatever the form it’s the same product.
Can you use too much blue Loctite?
Using too much threadlocker Tightening the fastener will spread the threadlocker evenly. Using too much threadlocker can cause excess to spill out and migrate to unwanted areas.
Who invented threadlocker?
professor Vernon K. Krieble
Thread-locking fluid was developed by American professor Vernon K. Krieble in 1953. His company, American Sealants, founded the Loctite brand.
Why choose Vibra-Tite VC-3 threadmate?
With exceptional reliability, Vibra-TITE VC-3 Threadmate holds parts in place even during extreme vibration and resists leakage by acting as a dam between mated threads. Using steady pressure and standard hand tools, parts coated with Vibra-TITE VC-3 Threadmate can easily be adjusted, removed, and reused.
How long does it take to remove Vibra-Tite VC-3?
10-30 minutes+, depending on part size. Using steady pressure and standard hand tools, parts coated with Vibra-Tite VC-3 can easily be adjusted, removed, and reused up to 5 times. Since Vibra-Tite VC-3 remains a thick, resilient, viscous resin, its cold flow properties actually minimize galling or stripping of soft threads during reuse.
Where can ND industries apply Vibra-Tite VC-3?
In addition to supplying user-applied bottles and cans of Vibra-Tite VC-3 for on-the-job application, ND Industries can apply Vibra-Tite VC-3 at any of our regional service centers. Bottled: 5 Years from date of manufacture.
What is VC-3 threadlocker?
VC-3 essentially isolates the fastener from the vibration of the assembly, absorbing any intense shock and vibration which keeps the fastener from rotating. Vibra-Tite VC-3 Threadmate is one of the most versatile threadlockers available on the market.