Is a DT 360 a good engine?
Re: DTA 360 info They are both good engines but the cummins is alot more common so if you ever needed to replace the engine, it would be a whole lot easier to find the parts or running cummins than it would be a DT360 and also cheaper.
How do you time a dt466 injection pump?
It’s fairly easy, you line the crank up to the timing you want. Then pull a cover on front of the injection pump. When the cover is off loosen the 3 bolts and line the marks up in the peep hole by turning the gear. You don’t actually move the pump at all.
How do I adjust my fuel timing?
If you decide to alter the fuel injection pump, you’ll need to:
- Use a socket wrench on the front camshaft bolt to hand-turn the engine clockwise until the first cylinder is at TDC.
- Both the intake and exhaust valves should be closed, and the TDC mark should be aligned.
Is DT360 wet sleeve?
The DT engine family is based around a wet-sleeve design where the cylinder wall or sleeve is in contact with the engine coolant for added durability and improved heat transfer. The DT360 uses a mechanical fuel injection, a standard turbocharger and is the smallest model of the DT family.
How many horsepower is a dt466?
International DT466 Specs
| Manufacturer | Navistar International * |
|---|---|
| Engine Weight | 1,425+ lbs |
| B50 Life | 550,000 miles |
| Horsepower | Up to 300hp @ 2,200 rpm |
| Torque (lb-ft) | Up to 860 lb-ft @ 1,300 rpm |
Where is TDC on dt466?
Finding TDC #1 Compression Stroke On the timing cover there is “TDC” cast into the housing. Line up the notch on the belt pulley and check to see if the the #1 valves are loose. The #6 cylinder valves (at TDC with #1 cylinder) will be on the exhaust stroke with no valve clearance.
How much horsepower can you get out of a dt466?
3,000 hp
The engine can crank out more than 3,000 hp and can be spun to an insane 7,500 rpm.
Where do you adjust if injection timing is incorrect?
The most common ways to adjust injection timing are programming the ECM, adjusting the fuel injection pump, replacing the camshaft, and replacing the cam followers or gaskets.
Who makes the DT360 engine?
International Navistar DT360 Motor Dt-360 Engine.
Who makes the DT360?
Displacement. The International DT 360 has a displacement of 360 cubic inches or 5.9 liters; produced by six in-line cylinders with a bore and stroke of 4.010 by 4.751 inches.