How do I clear CMOS MSI 970a g46?

How do I clear CMOS MSI 970a g46?

turn off the computer and take a flat head screwdriver and touch the two pins together. this will short between the two pins and clear the cmos. If you have an old HDD laying around there might be a little jumper on a set of the pins you can also use one of those, you just have to remember to take it back off.

Where is the CMOS reset button?

If you have a newer and fairly high-end motherboard, they often have a dedicated “Clear CMOS” button on either the rear I/O near the USB ports or on the motherboard itself, usually along the edges of the board. To use it, power the system on and then press the reset button.

What is CMOS reset button?

Clearing CMOS will reset the BIOS settings to their defaults Her writing has appeared in Geekisphere and other publications. Clearing the CMOS on your motherboard will reset your BIOS settings to their factory defaults, the settings that the motherboard maker decided were the ones that most people would use.

How do you clear CMOS with a jumper?

Steps to clear CMOS using the jumper method In general, the CMOS jumper is three pins located near the battery. In general, CMOS jumper has positions 1–2 and 2–3. Move the jumper from the default position 1–2 to position 2–3 to clear CMOS. Wait 1–5 minutes then move it back to the default position.

How do I reset my computer without BIOS?

Easy way to do this, which will work regardless of what motherboard you have, flip the switch on your power supply to off(0) and remove the silver button battery on the motherboard for 30 seconds, put it back in, turn the power supply back on, and boot up, it should reset you to factory defaults.

What happens when you reset the CMOS?

Clearing the CMOS resets your BIOS settings back to their factory default state. In most cases, you can clear the CMOS from within the BIOS menu. In some cases, you may have to open your computer’s case.