What is HP shape steel?
Cross section. The HP steel bearing piles are special H beams with the same thickness for flange and web. Bearing piles of this type are used all over the world for the deep foundations of various structures: housings, industrial constructions, bridges…
What is HP shape?
A standard structural hot-rolled steel I-shaped column section; used for piles of a specified category designated by the prefix HP, placed before the size of the member.
What is an HP beam?
Pile beams create a foundation for heavy structures like buildings, bridges and roads. The piles are made of steel that’s driven or drilled into the ground in order to help distribute the weight of a structure from the loose topsoil down to the stronger soil or rock below.
What are the dimensions of steel beams?
Steel I-Beam Sizes (Wide Flange)
| W 24 x 94 | 24.1 | 9.07 |
| W 24 x 84 | 24.1 | 9.02 |
| W 24 x 76 | 23.9 | 9 |
| W 24 x 68 | 23.7 | 8.97 |
| W 24 x 62 | 23.7 | 7.04 |
How do you read steel sizes?
The “W” indicates that it is a wide flange beam (as opposed to, say, an S beam); the “14” is referenced as section number; and the “211” indicates that the beam weighs 211 lbs per foot. You should note that the permissible variations from the specified dimensions can range from 1/8in to 5/16 depending on the beam size.
Which is stronger I beam or h-beam?
An H beam has a thicker central web, which means that it is generally stronger. An I beam generally has a thinner central web, which means that it is often not able to receive as much force as an H beam.
How do you size a steel I beam?
Measure the distance in inches that you need the steel beam to fill. Write this figure down on a sheet of paper as your clear span for the beam. Measure the length in inches of the floor joist that the I-beam must support. Divide that number by two.