What should you not do with a disc sander?
NEVER wear gloves or hold the work with a rag when sanding. SAND with the grain of the wood. DO NOT sand pieces of material that are too small to be safely supported. AVOID awkward hand positions where a sudden slip could cause a hand to move into the sanding belt or disc.
Which items should never be used on a belt sander?
Clothing and Jewelry. Do not wear loose clothes while using a belt sander. Any type of clothing that can potentially come in contact with a belt sander must be secured. If you are wearing loose, long-sleeve shirts, roll up the sleeves.
What is the difference between a disc and a belt sander?
Popular for the trade workshops, the belt sander is much bigger in size than the bobbin and disc sander. Its long flat surface makes it ideal for flattening and levelling long pieces of timber such as panelled doors.
How long should you use a sander for?
But – random orbital sanders are designed to be used extremely slowly. Not quite a snail’s pace, but perhaps an ant’s. So, what’s the ideal speed? About ten to twelve seconds per linear foot.
How much weight should you apply to the belt sander while sanding?
No need to lean on the sander. Just let the weight of the machine do the work. When you get to the end of the board make sure the platen doesn’t cantilever too far past the edge. Allow 1/3 or less of the platen length to project over the edge.
What would a belt disc sander be used for?
Belt sanders are highly effective tools for removing roughness and preparing woodwork for less aggressive tools in the process like random orbit and finishing sanders. It is crucial to belt-sand with the wood grain rather than across it. Otherwise, the belt sander’s lateral action can ruin the work.
What is a belt sander good for?
What are Belt Sanders? Belt sanders are multiuse tools. They are commonly used for trimming to a scribed line (photo), sanding very rough surfaces, leveling surfaces (like a replacement board in a hardwood floor) and freehand rounding and shaping.