What size is 5 mm drill bit?
| Drill Bit Hole Diameters | ||
|---|---|---|
| Metric Size | Fractional Size | |
| 5 mm | .1968 | 7/32 |
| 6 mm | .2362 | 15/64 |
| 7 mm | .2756 | 1/4 |
Do they make mm drill bits?
Gun Drill Bits | Drill Size (Inch): 0.0098 | Drill Size (Metric): 0.250 (mm) Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
What size is a 6.8 mm drill bit?
0.2677
Standard metric drill bit sizes
| Drill size | Diameter (in) |
|---|---|
| 6.6 mm | 0.2598 |
| 6.7 mm | 0.2638 |
| 6.8 mm | 0.2677 |
| 6.9 mm | 0.2717 |
What size is a 6 mil drill bit?
6mm is 0.2362198 inches. 15/64 is 0.234 inches.
Does DeWalt make metric bits?
For reference, DeWalt do make metric drill bits however I suspect they don’t market them in the US. Maybe an idea to speak to a local DeWalt dealer to see if they can get them in for you.
What drill bit is 8mm?
An 8mm tap will require a 17/64″ diameter drill bit size at a 1.25 tap. There are two different tap sizes within the 8mm range. Because of this, the drill bit sizes will differ from one another. The 17/64” drill bit is based on the measurements of a 8mm x 1.25 tap.
What size drill is 6mm?
Metric Tap and Drill Bit Size Table
| Tap | Metric Drill | US Drill |
|---|---|---|
| 5mm x 0.8 | 4.3mm | – |
| 6mm x 1.0 | 5.2mm | – |
| 7mm x 1.0 | 6.1mm | 15/64″ |
| 8mm x 1.25 | 6.9mm | 17/64″ |
How thick is 5 mm in inches?
3/16 inch
5mm = just over 3/16 inch. 6mm = almost 1/4 inch.