What is the density of PS?
0.96–1.05 g/cm3
Polystyrene
| Names | |
|---|---|
| Density | 0.96–1.05 g/cm3 |
| Melting point | ~ 240 °C (464 °F; 513 K) For Isotactic Polystyrene |
| Boiling point | 430 °C (806 °F; 703 K) and depolymerizes |
| Solubility in water | Insoluble |
What is the density of abs?
1.0 – 1.05 g/cm3
Acrylonitrile Butadiene Styrene (ABS) is an ideal material wherever superlative surface quality, colorfastness and luster are required. ABS is a two phase polymer blend….3 Physical Properties.
| Tensile Strength | 40-50 | Mpa |
|---|---|---|
| Thermal Coefficient of expansion | 70 – 90 | x 10-6 |
| Max Cont Use Temp | 80 – 95 | oC |
| Density | 1.0 – 1.05 | g/cm3 |
What is the density of PC?
4 Physical Properties
| Tensile Strength | 70 – 80 N/mm² |
|---|---|
| Notched Impact Strength | 60 – 80 Kj/m² |
| Thermal Coefficient of expansion | 65 x 10-6 |
| Max Cont Use Temp | 125 °C |
| Density | 1.20 g/cm3 |
How do you find the density of a plastic?
It is calculated by dividing the mass of the material by the volume and is normally expressed in g/cm3. The density of a plastic sample may change due to change in crystallinity, loss of plasticizers, absorption of solvent, etc.
What is PS plastic?
Polystyrene (PS) plastic is a naturally transparent thermoplastic that is available as both a typical solid plastic as well in the form of a rigid foam material. PS plastic is commonly used in a variety of consumer product applications and is also particularly useful for commercial packaging.
What is the density of pine g cm3?
Wood Density Chart
| Solid | Density |
|---|---|
| (103 kg/m3) | |
| Pine, Corsican | 0.51 |
| Pine, radiata | 0.48 |
| Pine, Scots | 0.51 |
How do you find the density of a film?
Simply put, dry film density is just the mass of the dry paint film divided by the volume of the dry paint film. So dry density follows the same density equation, D = m/v, as wet density.
What is the density of plastic in g ml?
Sorting Recyclable Plastics by Density
| name | Density/g/cm3 | Uses |
|---|---|---|
| Polypropylene | 0.90 – 0.92 | yogurt cups, plasticware |
| Low Density Polyethylene | 0.91 – 0.93 | squeezable bottles |
| High Density Polyethylene | 0.94 – 0.96 | milk bottles, bags |
| Polystyrene | 1.03 – 1.06 | egg cartons, packing peanuts |