How do you reset an AEG washing machine?

How do you reset an AEG washing machine?

You have to run the “test” cycle. With the switch in the off position, hold in the Pre wash & soak button and then turn the rotary knob to gentle (or short) spin. Presumably this should run a short test sequence and clear the error.

How do you clean the lint from a washer dryer combo AEG?

1. Empty the drum.
2. Clean the drum, seal and door using a damp cloth.
3. Set a rinsing and spin cycle to clean the machine of fuff.
4. regular cleaning will encourage the machine to remain clear of fluff.

How do I reset my AEG lavamat 6000 washing machine?

press and hold the and the buttons for at least 10 seconds simultaneously until the second acoustic signal….Resolution

1. In the programme list screen, tap on the shortcut to enter the setting menu.
2. Tap on the WiFi bar, and a new menu is shown.
3. Tap on Reset network.

Why is my AEG washing machine not working?

The most likely cause is a blockage somewhere in the drainage system. If outlet pipes are obstructed the water won’t drain and the spin cycle won’t begin. There’s water leaking – Washing machine water leakage can come from water hose couplings.

What does code EFO mean on AEG washing machine?

AEG failure EF0 or EFO The drain filter may be clogged. Clean and replace the filter. You can find this filter on the front of your washing machine, at the bottom right behind a flap.

Do you need to clean the filter on a washer dryer?

Filter. All washer-dryers have a filter, which catches fluff whipped up when drying, as well as bits of debris. They need to be cleaned regularly, which can be a pain on some models because they are often close to the ground and can be fiddly to open.

Why is no water going into my washing machine?

A common cause of a washing machine not taking in any water is either a kinked fill hose, or the tap becoming faulty (or even accidentally turned off). Some of the easy fit self-tapping taps can become clogged up inside, others can jam inside so you turn it on but unbeknown to you, the valve inside doesn’t turn.

How do I fix EFO errors?

Resolution:

1. Use less detergent. Using too much detergent may cause excessive foaming.
2. Clean the dispenser drawer.
3. Check for laundry caught in the machine.
4. Check for leaking at the bottom – fluff filter.
5. Check the water supply hose.
6. Check the door seal.
7. Contact an Authorized Service Center.