What is the best twist rate for 300 win mag?

What is the best twist rate for 300 win mag?

For a . 300 WM that’s intended use is LRH should have a. 1-10 twist barrel on it. You will end up shooting a bullet over 200 grains, more then likely 215-230.

What is the twist rate of a Remington 700?

All Remington 700, Seven, 600, 660, and XP-100’s in . 223 are a 1 in 12 twist with the exception of the most recent “Tactical” models (i.e. XCR Tactical, SPS Tactical, etc.) which are 1 in 9.

What is the effective killing range of a 300 win mag?

1,210 yards
The . 300 Win Mag sees use in long-range benchrest shooting competitions and has been adopted by law enforcement marksmen and by a few specific branches of the U.S. Military for use by snipers. Maximum effective range is generally accepted to be 1,210 yards (1,110 m) with ammunition incorporating low-drag projectiles.

Is Remington 300 Win Mag a short or long action?

The 300 Win. Mag. is a classic “standard-length” cartridge based on the belted 375 H&H Magnum case. It fits actions designed for 30-06-length cartridges. The 300 WSM is a rebated rim, short-action round that fits 308-length rifle actions.

What grain bullet is best for 1 in 10 twist 300 Win Mag?

The 1:10 twist should handle up to 200 grain bullets no problem if wanted.

What is the best twist rate for 7mm Rem Mag?

Pac-Nor order form recommends the 5 groove with either a twist rate of 9″ or 10″ for the 7mm Rem Mag.

How much does a 300 Win Mag drop at 1000 yards?

20 inches
At 1000 yards this translates to an extra 20 inches of drop and 10 inches more drift in a 10 mph cross wind for the 300 Win Mag. In order to match the BC of the 7mm Rem Mag you have to go up to about a 210 grain bullet and still be pushing the same velocity.

Whats better 300 Win Mag or 300 WSM?

300 WSM is greater than the increased wideness of the case of the . 300 WSM. The difference in how low the bullet sits in the casing is negligible and results in the . 300 Win Mag being able to hold a greater amount of powder through the case capacity does not represent how much powder is loaded into each cartridge.