Is Pinewood Derby only for Cub Scouts?

Is Pinewood Derby only for Cub Scouts?

Pinewood derby is a registered trademark of the BSA, so most use different names. Each derby has slightly different rules for making and racing their cars….

Do Pinewood Derby cars have to be a certain length?

All cars must pass the following inspection to qualify for the race: Width shall not exceed 2-3/4 inches. Length shall not exceed 7 inches. Weight shall not exceed 5 ounces.

What is the weight limit for a Pinewood Derby car?

5 ounces
MAX OUT YOUR CAR’S WEIGHT AT 5 OZ In most races, a Pinewood Derby car’s weight is limited to 5 ounces. If your car weighs less than that, add coins or other weights.

Can you use duct tape on a Pinewood Derby car?

The wood provided in the kit must be used. The block may be shaped any way that is desired. by “sticky substances”, e.g. tape, or tack spray. The weight MUST NOT be taped on (i.e., masking Page 2 tape, duct tape, scotch tape…).

What are the rules for Pinewood Derby car?

Pinewood Derby Rules

• The car weight shall not exceed 5.0 ounces.
• The overall length of the car shall not exceed 7 inches.
• The overall width of the car shall not exceed 2 ¾ inches.
• The maximum height of the car cannot exceed 5 inches (Adjust this limit so that the cars will pass under your finish gate).

Can I add weight to my pinewood derby car?

The heavier your pinewood derby car, the faster it will go. Most race rules limit the weight to 5 oz so you want your car as close to the limit as possible. The Wedge block will need about 2.5 oz of additional weight to bring it up to the 5 oz limit. You should install the weights in your car before you paint it.

Do you glue Pinewood Derby axles?

7. Create Glue Holes: Glue the axles firmly in their holes to ensure that they stay perfectly placed, but make sure you don’t get glue on your wheels. 8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow.