What size belt does a ridgid oscillating sander take?
4 in. x 24 in.
Specifications
| Input | 3/8 HP, 5 Amps. |
|---|---|
| Oscillation | 60/min. |
| Stroke | 3/4 in. |
| Belt Size | 4 in. x 24 in. |
| Sanding Drums (Provided): | 3/4 in., 1 in., 1-1/2 in., 2 in. |
What is a oscillating belt sander used for?
An oscillating spindle sander solves the problem by moving the sanding drum up and down, exposing more of the surface of the drum to the workpiece. The result is a smoother edge on your workpiece, free of burn marks. Oscillating spindle sanders have been in use in production shops for years.
What is the oscillating spindle sander?
An oscillating spindle sander is a benchtop (or in some commercial models, floor-standing) woodworking tool designed to sand the edges of boards. The sander has a small tabletop and a sanding drum that protrudes up through the rear portion of the tabletop.
Which is better belt or disc sander?
The disc is great for precise edge work, like fitting miter joints and trueing outside curves. The belt allows you to flatten faces and edges, shape contours and smooth inside curves. We tested 18 combination sanders that cost $500 or less.
What is the best way to sand spindles?
The proper way to sand spindles is with two grades of sandpaper — from heavy to light.
- Fold a sheet of 100-grit sandpaper three times.
- Revolve the spindle back and forth, twisting it while you encircle it with the sandpaper.
- Slide the cylinder of sandpaper down or up the spindle, overlapping the first area by 1 inch.
Is a spindle sander worth it?
It does a good job sanding off the bandsaw cut marks. Obviously, it’s not the best tool for sanding a straight edge, but it can do a passable job on small toys, crafts, etc.