What is the default-gateway for IPv6?
fe80::1
As a result a network engineer can give users a very simple to follow statement for manually configuring their hosts with IPv6: “The default gateway is always fe80::1”.
How set IPv6 default-gateway in Cisco?
In the Managed Network node hierarchy, navigate to the Configuration > Interfaces > IP Routes tab. Click + under the Static Default Gateway accordion. Select IPv6 from the IP version drop-down list, and enter the IPv6 address in the IP address field. Click Submit to add the address to the IPv6 default gateway.
Is there gateway in IPv6?
An IPv6 gateway is a device that uses the newer IPv6 (Internet Protocol version 6) standard rather than IPv4 to transmit data.
What type of IPv6 address is f 801?
Explanation: Link-local IPv6 addresses start with FE80::/10, which is any address from FE80:: to FEBF::. Link-local addresses are used extensively in IPv6 and allow directly connected devices to communicate with each other on the link they share.
How do hosts in an IPv6 network learn about the default gateway?
Discovering the Default Router with NDP In IPv4, hosts discover their default router (default gateway) either through static configuration on the host or, more typically, with DHCP. IPv6 can use both of these same options as well, plus the NDP RS/RA messages as explained in the previous section.
How do I find my IPv6 address?
Type “ipconfig/all” on the blinking cursor then press [Enter]. NOTE: You will find the IPv6 Address network details under the Ethernet adapter Local Area Connection section.
Does IPv6 need default gateway?
Guidelines. The ipv6-default-gateway command designates the default IPv6 gateway that the interface can reach. Define a default IPv6 gateway if you defined IPv6 IP addresses. If the interface supports both IP families, use the ipv4-default-gateway command to designate the default IPv4 gateway.
Which IPv6 prefix is reserved for communication?
Answers Explanation & Hints: IPv6 link-local unicast addresses are in the FE80::/10 prefix range and are not routable. They are used only for communications between devices on the same link.