How do you reset Xerox drum cartridge?

How do you reset Xerox drum cartridge?

Reset the Drum Cartridge Counter

1. From the Standby Mode, press the [Menu] (up arrow) button, then press [5], [2], [0], [4]. The screen will display: Change drum. Yes. No.
2. Press [1], then press [Enter]. The screen will display: Completed.
3. Press [Stop] to return to the Standby Mode.

Where is the drum cartridge on Xerox?

Open the Front Door of the printer. Turn the release lever on the left side of the Drum Cartridge Cover to the left to unlock the cover. Pull the cover open to access the four Drum Cartridges. Grasp the orange handle of the appropriate Drum Cartridge and gently pull it out of the printer.

What is a toner reset chip?

Reset or Replace a Chip If this type of chip is in your toner, you will need to replace the chip when refilling your cartridge. Other chips can be reset with a “resetter,” a small plastic tool that physically connects with the cartridge chip and tells the chip to return its count of spent droplets to zero.

What is drum cart warning on printer?

This error displays to advise you that the Drum Cartridge is nearing its end of like and it is time to reorder a new cartridge. If necessary, re-order a new cartridge to avoid any interruption in your copying/printing services.

How long does a Xerox drum cartridge last?

Standard-yield Xerox toner cartridges produce around 1,500 to 2,600 pages per cartridge. These toner cartridges are ideal for use in the home or a smaller office.

What is the difference between drum and toner cartridges?

The toner cartridge is the container that holds the toner powder. The drum unit is an electrically charged cylinder that fuses that toner powder onto paper to create text and images. Both of these components are essential for producing a print.

How do I reset my Xerox Phaser 6022?

Xerox Phaser 6022/NI User Manual

1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then.
2. In CentreWare Internet Services, click Properties.
3. To expand the menu, in the Properties pane, for the General folder, click the plus symbol (+).
4. From the General menu, click Resets.

How do I reset my Xerox Phaser 6510 printer?

Reset the Printer to Factory Defaults

1. At the printer control panel, press the Menu button.
2. Navigate to Admin Menu, then press OK.
3. Navigate to Init/Delete Data, then press OK.
4. Navigate to Delete All Data, then press OK.
5. At the Press OK to init prompt, press OK.
6. At the Press OK to delete all data prompt, press OK.