Is Fertan rust converter any good?

Is Fertan rust converter any good?

Most of the rust converters currently being sold are anemic and ineffective. In contrast, this one is outstanding and worth the extra money. I have used this on a number of rusty items with good success. The key is to make sure any flaky rust is removed so sand the surface first and then wash it off with water.

How do you use a Fertan rust converter?

Apply FERTAN using a brush, roller or sponge and let it sit for about an hour. Dampen the treated surface with water to maximise penetration. Leave FERTAN to react with the surface for 24 hours at 20C to 48 hours if lower for best results. Remove the black powdery dust with a damp cloth and leave it to dry.

What is rust converter made of?

Typical ingredients Commercial rust converters are water-based and contain two primary active ingredients: tannic acid and an organic polymer. Tannic acid chemically converts the reddish iron oxides into bluish-black ferric tannate, a more stable material.

How do you clean a Fertan?

Brush off loose rust and remove dirt, oil or silicone products that will prevent Fertan reaching the metal surface. Apply Fertan by brush, roller or spray and leave for 24 hours, extending this to 48 hours in low temperatures. The surface can now be rinsed off and overpainted.

How do you get rust out of Bunnings?

Steps

1. 1Apply an abrasive chemical to loosen the rust. As you will be using an abrasive chemical cleaner, make sure you wear protective gloves.
2. 2Rub over with steel wool. Gently rub the tool over with steel wool to remove the rust.
3. 3Apply a protective lubricant.
4. 4Use a wire brush on heavily rusted tools.

Which rust converter is best?

Corroseal is widely regarded as the best rust converter paint and metal primer available today. Corroseal is easy to apply with a one-step process of using a paintbrush or a roller. Though it doesn’t come in a spray bottle, if you have your own, it is thin enough to use as a spray.

Can you paint over rust converter?

Q: Do you have to paint over a Rust Converter? A: No. Although you do not have to paint after the Rust Converter application, if you would like a different color other then black then use an oil based paint which will also resist weather, sunlight, rain and even salt spray without peeling or cracking.

What is the best rust neutralizer?

1. Editor’s Choice: Evapo-Rust Original.
2. Rust-Oleum Automotive Rust Reformer.
3. JENOLITE Rust Converter.
4. Loctite Extend Rust Neutralizer.
5. Rust Converter ULTRA – Pro Grade Rust Repair.
6. Corroseal Water-Based Rust Converter.
7. VHT Rust Convertor Can.
8. Rust Kutter- Rust Converter.

What is the best rust converter in Australia?

Brunox Epoxy, the best rust converter now available in Australia! Refinish Imports Pty Ltd is excited to announce it is now the Australian Distributor of Brunox products – Epoxy Primer and Turbo Spray.

Can I paint over rust converter?

How long does Corroseal last?

a 12 month
Corroseal typically has a 12 month shelf life when stored as instructed in the technical data sheet, although in some cases it may last longer or shorter than this period.