How do you reset a GM TPMS sensor?

How do you reset a GM TPMS sensor?

Turn your vehicle’s key to the “On” position without starting the vehicle. Push the TPMS reset button until the tire pressure light flashes three times, then let go. Start the car and wait for about 20 minutes for the tire pressure sensor to refresh.

Where is the TPMS reset button on a 2013 GMC Sierra?

With Steering Control

1. Select INFO.
2. Scroll down to the TIRE PRESSURE menu.
3. Press and hold the ✓ button to enter the relearn mode.
4. Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
5. A horn chirp will confirm that the sensor has been reset.

How do you reset the tire pressure sensor on a GMC Denali?

Starting with the vehicle off, turn your key to the “On” position, but don’t start the vehicle. Find the TPMS reset button (check your manual if you need help), and hold it until the tire pressure light blinks three times. Then, start the car and wait 20 minutes for the tire pressure light to reset.

How do you reset the tire pressure monitoring system on a Chevy Silverado?

Turn vehicle to ON/RUN. Push the trip odometer reset stem until Tire Pressure is displayed. Push and hold trip reset stem to begin the sensor matching process. Push trip reset again to confirm.

How do you reset the TPMS on a GMC Sierra 2017?

To reset the tire pressure monitoring system or tpms in Your 2017 GMC Sierra, turn the ignition key to the On position. Then press the tpms button, located under the dash, until the tpms light blinks several times.

How do you reset the change oil light on a 2021 GMC Sierra?

Turn/rotate the trip odometer stem/knob on the instrument panel until “Remaining Oil Life” is displayed. Press and hold the knob or thumbwheel until a prompt appears. Select “Yes” and the “Oil Life” resets to 100 percent.