What are the benefits of water/methanol injection?
What are the benefits of water methanol injection with diesel applications?
- Reduce EGT’s by upto 250 degree’s.
- Increased power by 10-15%
- Allows the use of higher boost levels for greater power gains.
- Increased fuel economy.
- Decreased emissions.
Does water/methanol increase octane?
As previouisly mentioned already, water methanol injection has become a tried-and-true proven way for users to effectively increase their 87-93 octane pump gas. Depending on the amount injected and the type of mix used (pure water, pure methanol or a mix of the two), gains up to 10-25+ points in octane can be achieved.
Do you need a tune to run water/methanol injection?
Meth is 100% ok to run without tuning for it as long as you dont spray too much and cause rich conditions. There are many benefits to your stage 3 tune. You get a nice octane boost with pump gas, lower charge temps, valve cleaning, knock suppression and it helps keep fuel pressure up at lower rpms.
Does methanol injection clean valves?
Methanol makes for a very strong cleaning agent and will clear away the gunk that builds up on the valves and keep your engine running healthy and happy. As to the charge air cooling, methanol has a very high latent heat of vaporization compared to gasoline.
What are the disadvantages of methanol?
Some of the disadvantages of Methanol are that although its emissions are safer than that of gasoline, it has a high amount of formaldehyde emissions. As with Ethanol, it gets less gas mileage, so it would require more frequent fueling. The cost of Methanol is also slightly higher than that of premium gasoline.
Does methanol clean your engine?
Can you run methanol in a gas engine?
Methanol can be blended with gasoline in low-quantities and used in existing road vehicles, or it can be used in high-proportion blends such as M85 in flex-fuel vehicles or M100 in dedicated methanol-fueled vehicles as a substitute for gasoline or diesel.
Can you run E85 and water/methanol injection?
“The combination of both E85 and water/meth will each add to increasing octane levels and cooling effect,” Anders said. “You’re really getting the best of both worlds if you have both.
Does water/methanol injection work naturally aspirated?
This technology works well on both normally aspirated and boosted engines. Boost Cooler systems are fairly simple, and kits are available in basic form (Stage-1), or with a digital variable controller allowing the system to be boost, vacuum, or rpm actuated.
Do you need intercooler with methanol?
Sure there are exceptions to everything, and most people don’t worry about an intercooler when running fuels like M1 Methanol, but in general anything that makes the air intake charge cooler is a good thing.