Where are Weller soldering irons made?
Germany
Keeping pace with the increasing complexity of our customers’ needs, Weller Germany became the market leader for developing and manufacturing hand-soldering products worldwide. Our products were proudly emblazoned with “Made in Germany”, signifying innovation and reliability.
Are Weller soldering irons made in Australia?
Proudly Made in Mexico by WELLER these Professional quality soldering irons are ideal for leadlight and stained glass work. Known used and trusted worldwide by thousands of professionals Weller have built a solid reputation for the high quality of their soldering irons.
Are Weller and Hakko tips interchangeable?
The two tips are the same geometry, hollow cylinder. The Weller tip has an outside diameter of about 0.247 inches. The Hakko had OD 0.268 inches, and thus doesn’t quite slip into the Weller “socket”.
How can you be soldered safely?
Soldering Safety
- Never touch the element of the soldering iron…. 400°C!
- Hold wires to be heated with tweezers or clamps.
- Keep the cleaning sponge wet during use.
- Always return the soldering iron to its stand when not in use. Never put it down on the workbench.
- Turn unit off and unplug when not in use.
Does jaycar do soldering?
Get started with soldering | Jaycar Electronics.
How do you unlock the Weller soldering station?
Use the menu button and to the last menu with three line. Push up for each number to unlock.
What soldering iron should I buy?
– Hakko FX888D. – X-Tronic Model #3020-XTS. – Tabiger Soldering Iron Kit 60W. – Weller SP80NUS. – Vastar Soldering Iron Station. – Aoyue 469. – ANBES Soldering Iron Kit Electronics. – TFLY 60W Soldering Iron Station.
How to pick the best soldering iron?
Standalone Pencils. To power their heating element,“pencil type” soldering irons usually connect to a wall socket,but there are also portable variants.
How to solder with a Weller gun?
– There is a product called “tip tinner” that comes in small round containers. – When you buy a solder tip, coil solder wire on the tip to cover as much of the active surface as possible. – turn the heat on to half if variable, or make sure the solder is in contact with Metcal style tips.
How do I use a Weller soldering gun?
– the single most important soldering and desoldering requirement is temperature. the copper traces on circuit boards are glued to the board. – note the new lead-free solders melt about 20 deg C higher. – there’s such tight coupling in the transformer that AC line leakage is present. a requirement of elect
https://www.youtube.com/watch?v=JmGug00_dX0