How do I find my iSCSI initiator name in Linux?

How do I find my iSCSI initiator name in Linux?

type in “iSCSI” in the “Search program and files” text box, select the “iSCSI Initiator” option, a window will open called “iSCSI Initiator Properties”, in the “Configuration” tab you will find the iQN code under “Initiator Name:”.

What is iSCSI initiator name?

An iSCSI initiator node name is used when associating an iSCSI host with a Data ONTAP initiator group (igroup) for the purpose of mapping a LUN to the host.

How do I check my iSCSI initiator?

Open Control Panel -> Administrative Tools -> open Services -> Find “Microsoft iSCSI Initiator Service” service.

How do I start iSCSI initiator service in Linux?

Procedure

1. Configure the iSCSI-initiator daemon by editing the /etc/iscsi file. [root@R64SRV6 ~]# cd /etc/iscsi/ [root@R64SRV6 iscsi]# ls initiatorname.iscsi iscsid.conf [root@R64SRV6 iscsi]#
2. Manage the software by using the chkconfig command and the service command.
3. Use the default settings for the iSCSI initiator.

What is Iqn number in iSCSI?

A unique iSCSI qualified name (IQN) can be generated by the utility iscsi-iname and it is generated every time you invoke iscsi-iname. This IQN can be used to configure iSCSI initiator and the iSCSI target. Note: The IQN should be the same at both the iSCSI initiator and iSCSI target.

How does iSCSI initiator work?

How iSCSI works. ISCSI works by transporting block-level data between an iSCSI initiator on a server and an iSCSI target on a storage device. The iSCSI protocol encapsulates SCSI commands and assembles the data in packets for the TCP/IP layer. Packets are sent over the network using a point-to-point connection.

How do I create an iSCSI initiator in Linux?

Creating an iSCSI Initiator After creating a target with targetcli as in Section 25.1, “Target Setup”, use the iscsiadm utility to set up an initiator. In Red Hat Enterprise Linux 7, the iSCSI service is lazily started by default: the service starts after running the iscsiadm command.

How to start the iSCSI service in Red Hat Enterprise Linux 7?

After creating a target with targetcli as in Section 25.1, “Target Setup”, use the iscsiadm utility to set up an initiator. In Red Hat Enterprise Linux 7, the iSCSI service is lazily started by default: the service starts after running the iscsiadm command.

What are the different directories in Red Hat Enterprise Linux?

The /sys/ Directory 2.1.1.10. The /usr/ Directory 2.1.1.11. The /var/ Directory 2.2. Special Red Hat Enterprise Linux File Locations 2.3. The /proc Virtual File System

What is a target in iSCSI?

iSCSI Target Creation. An iSCSI target can be a dedicated physical device in a network, or it can be an iSCSI software-configured logical device on a networked storage server. The target is the end point in SCSI bus communication. Storage on the target, accessed by an initiator, is defined by LUNs.