What do I need to make a paracord bracelet?
You’ll need paracord, or equivalent 1/8″ diameter cord, a tape measure or ruler, scissors, side release buckle, and a lighter (torch lighter works best). The amount of cord used can vary, but for this example we’ll use 10 feet of paracord to start with.
How much parachute cord do I need for a bracelet?
* 1 inch of bracelet length equals about 1 foot, or 12 inches of cord needed. So, if your wrist circumference is 8 inches, measure out 8 feet (96 inches) of cord (see step 2).
How to make a paracord bracelet?
Measure the paracord to the length you want your bracelet. Take your green paracord and fold the ends down to make two loops at the length you measured for your bracelet. Then, pull the right strand over the center pieces and under the left strand. Take the left strand and pull it under the center pieces and up and over the right loop.
How many feet of cord do I need to make a bracelet?
So, if your wrist circumference is 8 inches, measure out 8 feet (96 inches) of cord (see step 2). 1. Choose your color (s) You can use one or two colors to make your bracelet.
How do I measure my wrist for a new bracelet?
Using your measuring tape, slide the buckle along the paracord until you reach your desired bracelet length. For this example, the bracelet is 6.5 inches. Be sure to include the center of the male end of the buckle up to the end of the female buckle in your measurements. Pull on the second buckle to the length you measured for your wrist.
How do you attach a bracelet to a buckle?
Find the center of the full length of cord by holding the loose ends together and pinching the loop at the other end. Thread the loop through one side of the buckle so it sticks out an inch or so. Thread the loose ends through the loop and pull the cord snug against the buckle. 5. Determine bracelet length