How much horsepower does a GM 602 crate motor have?

How much horsepower does a GM 602 crate motor have?

The GM 602 Crate Motor is designed to run on 92 to 93 octane fuel and produces 350 horsepower at 5,000 rpm and 390 ft. -lb. of torque at 3,800 rpm.

What should timing be set at on 602 crate motor?

602/604 TIMING 1) We recommend that both these engines be set at a TOTAL timing of 32 degrees. NOTE: different amounts of timing may be beneficial due to different fuels, exhaust designs, carburetor choices and weather/altitude conditions.

What’s the difference between a 602 and 604 crate motor?

One of the main benefits of crate engines–specifically Chevrolet “602” crate which is outfitted with iron cylinder heads and the more powerful “604” crate which has aluminum heads–is that they are quite affordable compared to most purpose-built racing engines.

What is the best oil to use in a 602 crate motor?

PTRO is a semi-sythetic Purpose Tuned Racing Oil designed specifically for your crate 602, 604 and 525 engines. This racing oil has an all in one lubrication protective and Racing package formula in it… Just pour it in and you’re done, it’s that easy.

What is the best fuel for a 602 crate motor?

Instead, they recommend 93 octane pump gas, because it does not contain ethanol, or 91 octane pump gas from a reputable brand name. “A customer brought in cans of VP 110 to dyno a 602 crate,” Jeff Baldwin, of Baldwin Racing Engines, said.

How many quarts does a 602 crate take?

The 602 engine uses an 8 quart pan (including filter) that is 8” deep.

What Block is a 602 crate motor?

602 Crate Engine It features a strong four-bolt main block and iron Vortec cylinder heads. A unique dual-pattern camshaft helps deliver more than 300 lb. -ft. of torque between 2,000 and 5,500 rpm peaking at 396 lb.

How much oil does a 602 crate take?

How Much Oil Does A 602 Crate Take? The best results (in a 602 or 604) are achieved by using 6-1/2 quarts of oil and 16 oz of Engine Treatment in a full container.

How do you check the oil on a 602 crate?

Recommended Oil Level for GM 602/604 Second, using the oil level inspection plug make sure that oil is near the recommended level. Third, warm the engine to near operating temperature. Finally, with the engine level, warmed up, and running at idle remove the oil inspection plug and measure the oil level.

What makes a 602 crate motor?

602 Crate Engine This Chevy race engine is designed for circle track use in the IMCA Sport Mod and Hobby Stock classes. It features a strong four-bolt main block and iron Vortec cylinder heads. A unique dual-pattern camshaft helps deliver more than 300 lb.

Are all 602 crate engines created equal?

Crate racing was intended to level the playing field. However, after several Track Championships and winning 7 out of 14 Races at Devils Bowl in 2016, we can tell you that Not all 602 circle track Crate Engines for Pro Stock, Thundertrucks, Sportsman Modifieds and other types of crate racing are created equal.

What are the parts of a GM ct350 sealed 602?

GM assembles the CT350 Sealed 602 with an 8-quart circle track racing oil pan, balancer, HEI distributor and an aluminum high-rise, dual-intake manifold. Add your carburetor, starter, spark plugs, wires and water pump as well as GM’s anti-tamper bolts to seal it up.

Can You rework heads on a Chevy ‘602?

We can rework your ‘602 heads or, you can buy a NEW set of complete heads and just bolt them on the motor! These are the same new Chevy castings that come on the ‘602 crate motor. They are “Undercover Ported” and assembled with our “Look-A-Like” valve springs, retainers and valve locks .

How much does it cost to modify a Chevy ‘602?

Cost to modify YOUR complete ‘602 heads is $1,945.00 plus return shipping. Bulletproof Your ‘602 Valve Train: Every racer who runs a ‘602 crate knows the stock valve springs are a real problem. The stock Chevy valve springs lose a lot of pressure after just a few nights of racing.