Is SATA and Serial ATA the same?
Serial ATA (Serial Advanced Technology Attachment or SATA) is a command and transport protocol that defines how data is transferred between a computer’s motherboard and mass storage devices, such as hard disk drives (HDDs), optical drives and solid-state drives (SSDs).
Why did my computer come with a Serial ATA cable?
Serial ATA replaces Parallel ATA as the IDE standard of choice for connecting storage devices inside of a computer. SATA storage devices can transmit data to and from the rest of the computer much, much faster than an otherwise similar PATA device. PATA is sometimes just called IDE.
Where does the Serial ATA cable go?
These cards install into a standard PCI slot on the motherboard, and may contain one to four or more connectors for serial ATA data cables. You may plug a data cable into any of the connectors.
What cables does a computer need?
Here’s an overview of the most common computer cable types you’ll encounter when dealing with computers.
- VGA Cable. Also known as D-sub cable, analog video cable.
- DVI Cable. Connect one end to: computer monitor.
- PS/2 Cable.
- Ethernet Cable.
- 3.5mm Audio Cable.
- USB Cable.
- Computer Power Cord (Kettle Plug)
Are SATA cables needed?
If you have one CD ROM drive and one hard disk, then essentially you will need two SATA Data cables and two SATA Power cables. One set of cables per drive. Basically, each SATA drive requires a SATA Data cable and a SATA Power cable to operate.
What is the function of a Serial ATA cable?
Serial ATA (SATA, abbreviated from Serial AT Attachment) is a computer bus interface that connects host bus adapters to mass storage devices such as hard disk drives, optical drives, and solid-state drives.Serial ATA succeeded the earlier Parallel ATA (PATA) standard to become the predominant interface for storage devices.. Serial ATA industry compatibility specifications originate from the
Is Serial ATA the same as SATA?
Serial just means the data is sent in a line. Serial ATA is the ATA protocol used by IDE drives sent over single wires rather than multiple in regular IDE which is now called “Parallel ATA” Serial ports on computers are essentially the same for the last 20 years and are not related to SATA.
What is the difference between Serial ATA and SATA?
Serial ATA built upon the original ATA interface that connected hard drives to motherboards. eSATA delivers improved performance and ease of use over the older ATA multi-pin interface. eSATA, or external SATA, allowed for the use of shielded cables outside of an enclosure.
What are the two types of Serial ATA cables?
The eSATA connector is mechanically different to prevent unshielded internal cables from being used externally.
https://www.youtube.com/watch?v=fHXeGNn9Z04