How do I disassemble my M1A?
M1A Disassembly: Step-by-Step Guide. Step 1. Remove the magazine (which you might have already done) from the rifle and close the bolt. To do this, pull the charging handle backward and Step 2. Step 3.
How do you remove a rod spring from a M1A?
Now, pull the connector lock toward the side of the rifle where the operating rod handle is located. Slowly remove the rod spring from the action of the M1A. Make sure to carry out this process with patience and precision as the spring is under tension and may fly out.
How do I remove the bolt from the receiver?
Now all that remains in the receiver is the bolt. To remove it, just slide it forward and pull it up to the right. This might require slight wiggling, but make sure not to apply much pressure, forcing the bolt outwards, as this may result in deformation or damage to it.
How to remove the op rod from an M1A?
Now, pull the connector lock toward the side of the rifle where the operating rod handle is located. Slowly remove the rod spring from the action of the M1A. Make sure to carry out this process with patience and precision as the spring is under tension and may fly out. Once the recoil spring is removed, the op rod can be removed from the receiver.
How long does it take to re-assemble an M1 Garand?
Re-assembly of the M1 Garand rifle is a process that can take a couple of weeks to learn. Becoming familiar with how a firearm operates and how the parts work together is very important for a plethora of reasons not the least of which is keeping it functioning.
How do I replace the rod spring on my M1A rifle?
Place your receiver upside down (sight down) on the table and gently pull the operating rod spring and spring guide to relieve pressure on the connector lock. Now, pull the connector lock toward the side of the rifle where the operating rod handle is located. Slowly remove the rod spring from the action of the M1A.