What is 7A 125V?

What is 7A 125V?

As shown in your pictures, the “125V 7A” rating you found is molded onto the plug (the thing at the end of the cord with the two flat prongs and one round prong), and tha rating only applies to the plug. That is a “NEMA 5-15” plug (North American common grounded type) and no such plug is rated for more than 125 volts.

What is HongLin?

HongLin Technology Group is specialized in providing power cord assembly, signal cable assembly, and wireless signal module products for high-end customers in the fields of computer, consumer electronics, communication, home appliances and distribution market, and wiring harness assembly and special cable for customers …

Can I use a 7a 125V power cord?

Yes. The things that affect the cord itself are current (amps) and resistance (actually, impedance for A/C) in ohms. The resistance or impedance is the same and the current is only half as much at the higher voltage.

Can I use a 125V cord on a 250v TV?

It is possible to use a power cord that is rated higher than the maximum you need. The original cord had a rating of 10A, 125V. The one you found is rated at 10A and will give you twice the power as it will actually encounter.

Can I use a 125V adapter?

That said the actual AC Adapter should be fine to use, as it is rated for use up to 240V. However since the cord to the wall is only rated for 125V I highly advise against using it. Your best course of action here is to reach out to HP for a cord rated for use with 220V power.

Is 125V the same as 220V?

If it’s only rated up to 125v, it can’t be plugged into a 220v sockets, and it’s very likely to be damaged if you try. If you want your charger to accept it, you need a step down adapter that reduces the voltage from 220v to one.

What is the difference between 125V and 250V?

For example, a 125V fuse can be replaced with a 250V fuse of equal amplitude while the voltage of the application is 250V or lower, but a a 250V fuse can’t be replaced with a 125V fuse of equal amplitude if the voltage of the application exceeds 125V.

What is the difference between 125V and 250v power cord?

They have different maximum voltage values which impacts what the work they are able to do. You can’t apply a fuse whose maximum voltage value is less than the voltage of the application.