How do I add a point to a spline in SolidWorks?

How do I add a point to a spline in SolidWorks?

To insert spline points:

1. In Edit Sketch mode, right-click a spline and select Insert Spline Point, or click Insert Spline Point. (Spline Tools toolbar). The pointer changes to . If the pointer is not on the spline, the pointer changes to .
2. Click one or more places on the spline where you want to insert a point.

How do I add spline points?

1. Double-click the spline. The Spline tab opens.
2. To add a point, right-click the spline at the desired location and choose Add Point from the shortcut menu. The point is added.
3. To remove a point, right-click the point on the spline and choose Delete Point from the shortcut menu.
4. Click to exit the tool.

How do you create a spline in SolidWorks?

To create a spline in a 3D sketch:

1. Click 3D Sketch. (Sketch toolbar) or Insert > 3D Sketch.
2. Click Spline.
3. Click to place the first spline point, then drag to sketch the spline.
4. Continue to place spline points and change planes if necessary.
5. When the spline is complete, double-click to stop sketching.

How do you join a spline in SolidWorks?

Here is the Tutorial.

1. Start SolidWorks in Part Mode.
2. Front Plane>>sketch.
3. Draw another spline tangent to this one.
4. Under sketch tab click the spline tool arrow and select fit spline.
5. Select the spline one by one.
6. Click OK and we can notice that two splines are merged into one.
7. Extrude the surface.

What is spline point solidworks?

The Insert Spline Point command adds one or more points to splines. With spline points, you can: Use spline points as handles to pull the spline into the shape you want. Add dimensions between spline points or between spline points and other entities.

What is a spline insert?

-These are the chromoly inserts for Profile and Madera Spline Drive sprockets and spiders. 6mm for use with Spline Drive Sprockets, Galaxy Sprockets, Elite Spline Drive Sprockets, & Madera Helm Sprockets.

How do I add a point to a spline in Autocad?

If you simple wish to create a point entity on a SPLINE then use osnap ‘nea to use the Point command. 2. If you wish to add a control point to an existing SPLINE then try the Splinedit command with the Fit, and then the Refine and Add options. You make end up also using the Undo option often.

How do you dimension a spline in SolidWorks?

In Edit Sketch mode, in the Spline PropertyManager under Parameters, select Tangent driving. Click Smart Dimension (Dimensions/Relations toolbar) or Tools > Dimensions > Smart. Select the spline to display the handles. Select any of the handles on either end, and click to place the dimension.

How do you control a spline in SolidWorks?

Adding Curvature Control to Splines

1. In the Edit Sketch mode, select a spline.
2. Click Add Curvature Control.
3. Drag to position the handle.
4. Click to position the handle.
5. Select the ball of the curvature control pointer and drag in either direction along the vector handle to adjust the radius of curvature.
6. Click .

Where is the fit spline tool in SolidWorks?

To open the Fit Spline PropertyManager: In an open sketch, click Fit Spline. (Spline Tools toolbar) or Tools > Spline Tools > Fit Spline. In the graphics area, click the sketch entities to fit to the spline.

How are splines cut?

The splines are cut into the shaft by a process called straddle milling. The indexing fixture holds the shaft of the spline steady while a groove is cut by the rotating milling cutters along its length. Depending on the depth of the spline, multiple passes along the same groove may be needed.