Who makes Hofmann lifts?
Snap-on
A: According to the Hofmann website, Hofmann is owned by Snap-on, which also owns brands like ATI Tools, CDI Torque Products, and Challenger Lifts. Snap-on has been around for over 100 years and has earned the title of the #1 professional tool brand worldwide.
How high does the roof need to be for a 2 post lift?
If you want to install a typical 2-post or 4-post lift in your garage, you need a ceiling that’s higher than 11 feet. While you can get a 2- or 4-post lift that works with a lower ceiling, almost all these lifts are not ANSI certified.
What is the minimum concrete thickness for a 2 post lift?
4‐1/4″
Pre-Existing Minimum Floor Requirements:
| TWO‐POST MODELS | MIN. THICKNESS | MIN. COMP. STRENGTH |
|---|---|---|
| XPR‐9 SERIES MODELS | 4‐1/4″ | 3000 PSI / 28 Day Aging |
| XPR‐10 SERIES MODELS | 4‐1/4″ | 3000 PSI / 28 Day Aging |
| XPR‐12 SERIES MODELS | 6 1/2″ | 3000 PSI / 28 Day Aging |
| XPR‐15 SERIES MODELS | 8″ | 3000 PSI / 28 Day Aging |
How much does it cost to install a 2 post lift?
Standard installation should be around or under $500 for a two-post car lifting solution and under $1,000 for a four-post auto lift. As previously noted, in-ground car lifts and installations are by far the most expensive auto lifting option available, sometimes costing as much as $10,000.
How wide is an alignment rack?
Warranty
| Height of Columns | 9′ 1-1/16″ (2770 mm) |
|---|---|
| Lifting Capacity | 14,000 lbs. (6350 kg) |
| Maximum Wheel Base | 182″ (4622 mm) |
| Open/Closed Front | Open |
| Overall Width | 11′ – 8-1/2″ (3568 mm) |
Can you use a 2 post lift to store a car?
CAPACITY TWO POST LIFTS. The only lift made (or designed) for both vehicle service and automotive storage. The wheel adaptor kit is designed to be used on all 10,000 – 18,000 lb. capacity 2 post lifts.
How much does a Hofmann 4 post lift weight?
The Hofmann ® 4-post Alignment Lift offers 18,000 lbs. of lifting capability and a lifting system that provides for high-wear resistance and a smooth gliding operation. The 18k 4-post Alignment Lift features 21 positions for maximum flexibility.
Why choose Hofmann’s professional lifts?
A device located on the end stroke bar prevents the roof from being damaged if it comes into contact with the lift’s upper crossbeam. Hofmann’s professional lifts enable you to work in complete safety.
What is a 10K 2-post lift?
Hofmann 10k 2-Post automotive/general purpose lifts are packed with premium features: industrial-strength columns, low-friction lift carriage slides, low-wear components with plated arm pins, steel pulleys, and more. Vehicles can be positioned and lifted symmetrically or asymmetrically.
What is a two post lift without base frame?
This two-post lift without base frame is designed for cars, SUV, vans and light trucks up to 5.5 t. This lift is designed for garages and tyre shops to lift cars, vans and light trucks up to 3.2 t This is a standard lift without base frame, with mechanic synchronisation control and with extremely low pick-up height.