Why is my D-Link camera not working?
If your camera is still not working, please Reset the camera and run the install setup again. To reset the camera, use a paper clip and then press and hold the reset button for 10 seconds and release.
How do I reset my D-Link 942L?
To reset your DCS-942L network camera to the factory setting, while powered-down, press and hold the “Reset” button on the rear of the camera for at least 10 seconds. Connect the power-cord, press and hold the “Reset” button while also holding the “WPS” button on the rear of the camera for another 10 seconds.
How do I get my Dlink camera back online?
1. Make sure your product is connected to the Internet. 2. Reboot your product and wait until the status light is solid green, then sign in to mydlink.com or the mydlink mobile app and check your online status again.
How do I factory reset my D Link camera?
Push and hold a paperclip in the reset hole for 5 seconds, thenrelease it. The camera should be back to factory default settings.
How do I set up my dcs-942l with mydlink cloud router?
If you have a mydlink™-enabled Cloud Router, setting up and configuring your DCS-942L is a snap, thanks to Zero Configuration. Simply connect your camera to its power adapter and then connect your camera to your Cloud Router with an Ethernet cable – the camera will automatically be added to your account.
What is the record&playback Wi-Fi camera (dcs-942l)?
The Record & Playback Wi-Fi Camera (DCS-942L) is a complete surveillance solution for your home or small office. The built-in night vision and PIR motion sensor give you 24 hour surveillance with motion detection, the ability to record snapshots or videos directly to a microSD card and two-way audio communication capability.
What is D-Link dcs-942l?
D-Link DCS-942L User Manual 56 Appendix A – Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless* connectivity within your home, business or public access wireless networks.
How do I install a dcs-942l network camera on my Network?
Installing a DCS-942L Network Camera on your network is an easy 4–step procedure: 1. Assign a local IP address to your network camera. 2. View the network camera using your Internet Explorer web browser. 3. Access the router with your web browser.