What is eco alloy?

What is eco alloy?

Overview. Hyper Eco Alloy is a Brass with high electrical conductivity that could not be achieved with conventional Brass (C2600). By optimizing the composition and applying our original “Hyper” technology, we have achieved the same levels of strength, spring properties, and bend formability as Brass (C2600).

What is eco bronze?

ECO BRONZE is a bearing material that is environmentally friendly and cost effective. With no added arsenic or bismuth, ECO BRONZE is a great lead-free* alternative to C93200.

What is the strongest brass alloy?

alpha-beta brass
More common than alpha brass, alpha-beta brass is both harder and stronger and has a lower cold ductility, than alpha brass. Alpha-beta brass is cheaper due to the higher zinc content, but more susceptible to dezincification corrosion.

Is brass a good alloy?

Alloy 464. Alloy 464 (or naval brass) is known for its excellent resistance to corrosion from seawater across a wide range of temperatures. Additionally, it demonstrates suitability for hot forming and hot forming, as well as drawing, bending, heading, soldering, brazing, and welding.

Is brass eco friendly?

Brass can be recycled many times over without diminishing the composition so it means that the recycling process can continue tie and again, thus making the metal highly sustainable.

Does Eco brass rust?

ECO BRASS has excellent dezincification corrosion resistance and is the same as C83600 (BC6). Forgings and castings of ECO BRASS have excellent dezincification corrosion resistance without heat treatment after forging and casting.

What is better bronze or brass?

Regardless of the elemental addition, bronze demonstrates greater hardness than pure copper. On the other hand, brass mainly contains copper and zinc, the latter of which allows for enhanced strength and ductility….The Differences Between Bronze and Brass.

Is brass easily recyclable?

Is brass a recycled material?

BRASS IS INFINITELY RECYCLABLE. Brass, like virtually all metals, can be recycled over and over again without losing the properties that make it valuable and useful. The only other material that can claim infinite recyclability is glass.

What is ECO BRASS?

ECO BRASS is suitable substitutes for lead-containing brass as well as Austenitic stainless steel (JIS : SUS304), since ECO BRASS has a similar strength to stainless steel in addition to characteristics like superior machinability and hydrogen embrittlement resistance.

Is ECO BRASS c69300 corrosion resistant?

ECO BRASS C69300 has excellent dezincification corrosion resistance (DZR) and excellent stress corrosion cracking resistance. Further, it is corrosion resistant (CR) to chemicals found in water and gas. It has high strength equivalent to stainless steel.

Can I use ECO BRASS to cut c3604?

GloBrass and ECO BRASS are applicable for dry cutting, because it’s Lead-free. If the chips are not cut off under the same cutting conditions of C3604, we suggest that higher feed rate and lower cutting speed could be effective.

What is the difference between c3771 and ECO BRASS?

GloBrass has well forgeability, the proper temperature is 580～650℃. However, C3771 cracked below 620℃ and at 820℃. On the other hand, suitable temperature of ECO BRASS is 700～760℃, in which the deformation resistance is low.