How do you reset a Garmin Pro 550?

How do you reset a Garmin Pro 550?

Move both toggle switches on the device to the center position. Turn the intensity dial to N. Hold the tone key and the bottom training key for 5 seconds. Factory Reset Complete appears on the handheld device screen and the device restarts.

Why is my Garmin dog collar not working?

The collar may not be properly tight on the dog. BarkLimiter only mode on the dog device was mistakenly activated. When turning the collar on, if you hold the power key for more than just one second, you can mistakenly put the collar in BarkLimiter only mode.

How do I reset my Garmin sport pro?

To perform a master reset:

1. Ensure the device is powered on and flashing a green light.
2. Rapidly press the power Button 8 times.
3. Wait for light to turn solid red then begin flashing green again.
4. Reference the Owner’s Manual to remove old collar information.
5. Reference the Owner’s Manual to repair the collar.

How do you turn on a Garmin Pro 550?

Turning On the Dog Collar Device On the dog collar device, hold the power key until the status LED turns green and the collar beeps to turn it on in training mode.

How do I reset my Garmin dog collar?

To perform a master reset:

1. Ensure the device is powered on and flashing a green light.
2. Rapidly Press the power button 8 times.
3. Wait for light to turn solid red then begin flashing green again.
4. Allow the collar a clear view of the sky for 20 minutes.

Why is my dog care training collar not charging?

Troubleshooting. Make sure the charger and Remote/Receiver is securely connected. Try to use other universal android USB cable to charge. Static is too weak or even completely no static; Static Mode has no effect on my dog.

What collars work with the Garmin 550 plus?

The Pro 550 Plus uses the same communication frequency as the Astro and Alpha series products in the United States….Dog Collars the Pro 550 Plus can be paired to:

• TT 15X.
• T 5X.
• TT 15 mini.
• T 5 mini.
• TT 15.
• T 5.
• TT 10 (discontinued)

How do I turn the light on/off on my pro 550?

1Select a dog collar device (Selecting a Dog Collar Device ). 2Move the mode toggle switch to A. 3Select the top training key to turn the light on. 4Select the bottom training key to turn the light off. Beeper Device The Pro 550 system works with optional accessories, including a beeper device.

How do I use the pro 550 system?

You can use several methods to train your dog. The Pro 550 system provides 7 stimulation intensity levels, which increase sequentially from 1 to 7. Momentary stimulation: Applies a brief stimulation when you press the training key, regardless of how long the key is depressed.

Does the pro 550 have a beeper?

Beeper Device The Pro 550 system works with optional accessories, including a beeper device. The beeper device emits high-volume sounds to provide information about the location and status of your dogs. You can operate the beeper device remotely using the Pro 550 system.

What kind of battery does the ProConnect pro 550 have?

Pro 550 Battery Replacement Instructions WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight. Do not use a sharp object to remove batteries.